Solved: Anyconnect: ping client IP address from ASA

mklimko123 · ‎12-08-2017

Hello.
I'm connecting to corporate LAN via AnyConnect from my laptop. I get an assigned ip address like 192.168.88.11. Is it possible to ping my IP address (88.11) from ASA or from inside corporate LAN?

Flavio Miranda · ‎12-08-2017

Hi @mklimko123

It is. If you have a NAT exempt you need to ping from the segment otherwise ASA will use Outside interface IP address and then will fail.

Here there's a fully explanation about it:

https://supportforums.cisco.com/t5/vpn/unable-to-ping-anyconnect-client-ip-from-asa/td-p/2485987

-If I helped you somehow, please, rate it as useful.-

View solution in original post

Flavio Miranda · ‎12-08-2017

Hi @mklimko123

It is. If you have a NAT exempt you need to ping from the segment otherwise ASA will use Outside interface IP address and then will fail.

Here there's a fully explanation about it:

https://supportforums.cisco.com/t5/vpn/unable-to-ping-anyconnect-client-ip-from-asa/td-p/2485987

-If I helped you somehow, please, rate it as useful.-