10-14-2016 07:27 AM - edited 02-21-2020 09:00 PM
I'm looking to implement the AMP enabler and Network Visibility Module within our AnyConnect client.
Unfortunately while implementing the profile, the drop down list does not have the correct options for "profile usage". There isn't AMP Enabled Profile for the list. I have verified my Plus license is installed on our boxes, and we've rebooted them.
I'm currently running ASDM 7.6, and ASA 9.4.
Any help would be appreciated.
Thanks,
Solved! Go to Solution.
10-15-2016 04:35 AM
Hi Njordic,
Please download the file "anyconnect-profileeditor-win-4.2.06014-k9.msi" from this link: https://software.cisco.com/download/release.html?mdfid=286281283&flowid=72322&softwareid=282364313&release=4.2.06014&relind=AVAILABLE&rellifecycle=&reltype=latest
Install it and check if you are getting option for AMP Enabler Profile Editor or not.
Thanks,
Vishnu
Please rate helpful posts.
10-15-2016 04:35 AM
Hi Njordic,
Please download the file "anyconnect-profileeditor-win-4.2.06014-k9.msi" from this link: https://software.cisco.com/download/release.html?mdfid=286281283&flowid=72322&softwareid=282364313&release=4.2.06014&relind=AVAILABLE&rellifecycle=&reltype=latest
Install it and check if you are getting option for AMP Enabler Profile Editor or not.
Thanks,
Vishnu
Please rate helpful posts.
10-19-2016 07:57 AM
Thanks for the reply. I'll try this out when a window is available.
10-19-2016 11:29 AM
That worked, thanks so much!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide