AnyConnect Profile Usage Problem

[Njordic1429]

I'm looking to implement the AMP enabler and Network Visibility Module within our AnyConnect client.

Unfortunately while implementing the profile, the drop down list does not have the correct options for "profile usage".  There isn't AMP Enabled Profile for the list.  I have verified my Plus license is installed on our boxes, and we've rebooted them.

I'm currently running ASDM 7.6, and ASA 9.4.

Any help would be appreciated.

Thanks,

[Vishnu Sharma · Accepted solution]

Hi Njordic,

Please download the file "anyconnect-profileeditor-win-4.2.06014-k9.msi" from this link: https://software.cisco.com/download/release.html?mdfid=286281283&flowid=72322&softwareid=282364313&release=4.2.06014&relind=AVAILABLE&rellifecycle=&reltype=latest

Install it and check if you are getting option for AMP Enabler Profile Editor or not.

Thanks,

Vishnu

Please rate helpful posts.

[Njordic1429]

Thanks for the reply.  I'll try this out when a window is available.

[Njordic1429]

That worked, thanks so much!!