I have configured multiple Anyconnect TunnelGroup profiles with each is own policy (ip pool, radius ...) Each TunnelGroup is forced under the .xml file deployed with annyconnect under the <UserGroup>tunnelgroup</UserGroup> section of the .xml file.
Good news it works great !
But now activating Cisco Secure Desktop everyuser felt under the DefaultWEBVPNGroup and the <UserGroup> section of the xml doesn't seems to be used anymore.
Is there a way to continue to have automatic profile selection with CSD working ?
Of course if I enable the manual choice of profile at login this works even with CSD.
Thanks for your help
User profiles are created by an administrator and are automatically delivered to a client machine during connection setup. Profiles provide basic information about connection setup, and users cannot manage or modify them.
Refer to the below URL for more info:
Thanks for your reply. I (administrator)created the xml profile and is well delivered. My only problem is when I activate SecureDesktop is seems that the UserGroup contained on the xml profile is not take into account as every users get to the default group.
Is there a when to use the UserGroup of the profile even with SecureDesktop ?