09-14-2020 07:22 AM - edited 09-20-2020 09:16 PM
Hi Everyone!
I am trying to access ASDM/HTTPS server from a remote location using IPSec VPN Client. IP address of Management interface is 192.168.0.1. When i connect with ASA using VPN, the client IP address is from the pool 192.168.0.2-192.168.0.20. Despite of being of the same network, i am not able to ping 192.168.0.1. I guess I am missing some NAT configuration. Can you please help me out to sort it out?
09-14-2020 07:26 AM
Hi @ArslanAwan
You need the management-access <interface-name> command configured in order to manage the ASA over a VPN
http://resources.intenseschool.com/management-access-to-the-cisco-asa-from-a-vpn-tunnel/
HTH
09-14-2020 09:18 AM
09-20-2020 11:39 PM
Please provide your configuration and let me know which IP address you are connecting from.
09-21-2020 12:13 AM - edited 09-21-2020 12:14 AM
Hi @Rob Ingram
this configuration is not working when we set management-access <management>. It works when i tried to access it on inside VLAN with https server enabled on inside inside interface.
In older versions of ASA i was able to get remote asdm session on management interface as well. However, in this particular case, it hasn't worked.
Thanks for your valuable input. Helped alot.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide