04-27-2017 11:39 AM
Hi All,
I don`t have experience with ASA and my apologies that my question is may be stupid for anyone.
I have vpn infrastructure with one HQ and 2 branch offices. (star topology)
hq - 192.168.0.1/24
1office - 192.168.1.1/24
2office - 192.168.2.1/24
I have communication between hq and each of offices but there is not communication between offices.
Each network pair exists in every tunnel.
Hq (192.168.0.1/24, 192.168.1.1/24) <---> 2office (192.168.2.1/24)
Hq (192.168.0.1/24, 192.168.2.1/24) <---> 1office (192.168.1.0/24)
The configuration is built with ASDM
Every ACL is "permit all" - "any less secure network" in both directions and the nat rules are not including every of these networks.
There are no yellow rows in the dump - just a "Teardown ICMP connection for ..."
There is no connection between 192.168.2.xx/24 and 192.168.1.xx/24
I will be very grateful if anybody can help me.
Best regards,
Asen
p.s. if necessary I can provide more detailed info and the config, but I think my mistake is known by experts.
Solved! Go to Solution.
04-27-2017 01:43 PM
Take a look at the following document: https://supportforums.cisco.com/document/12015091/cisco-asa-vpn-spoke-spoke-communication-hub
Perhaps ist's just a missing
same-security-traffic permit intra-interface
04-27-2017 11:44 AM
The ASA is 5510 with 9.1.7. Other routers are routers 881 and the configuration is fine. If I replace the ASA with router, everything works fine with the current configuration.
04-27-2017 01:43 PM
Take a look at the following document: https://supportforums.cisco.com/document/12015091/cisco-asa-vpn-spoke-spoke-communication-hub
Perhaps ist's just a missing
same-security-traffic permit intra-interface
04-27-2017 10:49 PM
Thank you very much. This is the fix of the problem. Too many hours lost and very simple solution. Thank you again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide