cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3584
Views
0
Helpful
7
Replies

asdm upgrade from 6.2(5)53 to "asdm-631.bin"

jamal_ayach
Level 1
Level 1

Trying to upgrade asdm. I get this message when setting the asdm image command:

Device Manager image set, but not a valid image file disk0:/asdm-631.bin

I know that some feature aren't available under 8.3 with 512MB. Is this one of them ?

Equipment: asa 5520

Current running:

Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.2(5)53

Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"

Hardware:   ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB

1 Accepted Solution

Accepted Solutions

What is wrong with this picture:-

--#--  --length--       -----date/time------            -----path-----

  180  17199         Jun 07 2010 10:30:06       asdm-631.bin
  134  11491880    Jun 07 2010 09:53:42       asdm-623.bin

Your 631.bin file is an incomplete image file.

HTH>

View solution in original post

7 Replies 7

andrew.prince
Level 10
Level 10

You need to make sure of the below:-

1) You have the image file "asdm-631.bin

2) The image is in the flash on the ASA.

See the below

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

HTH>

1) I have the file

2) image is on flash.

Followed instructions on that link. Still no results.

Now i'm back to 6.2.3

what is the output of "show flash"

show flash:

--#--  --length--  -----date/time------  path

   12  4096        Dec 31 2002 19:06:22  coredumpinfo
   13  43          Dec 31 2002 19:06:22  coredumpinfo/coredump.cfg
  180  17199       Jun 07 2010 10:30:06  asdm-631.bin
    3  4096        Mar 09 2009 09:26:34  log
    6  4096        Mar 09 2009 09:26:46  crypto_archive
  129  15943680    Jun 06 2010 20:43:10  asa831-k8.bin
  130  4863904     Mar 09 2009 09:30:02  securedesktop_asa_3_3_0_129.pkg.zip
  131  4096        Mar 09 2009 09:30:02  sdesktop
  175  1462        Mar 09 2009 09:30:02  sdesktop/data.xml
  132  2153936     Mar 09 2009 09:30:04  anyconnect-win-2.2.0133-k9.pkg
  134  11491880    Jun 07 2010 09:53:42  asdm-623.bin
  136  3756345     Mar 09 2009 09:30:10  anyconnect-linux-2.2.0133-k9.pkg

255844352 bytes total (215703552 bytes free)

What is wrong with this picture:-

--#--  --length--       -----date/time------            -----path-----

  180  17199         Jun 07 2010 10:30:06       asdm-631.bin
  134  11491880    Jun 07 2010 09:53:42       asdm-623.bin

Your 631.bin file is an incomplete image file.

HTH>

re-downloaded the file with and without the download manager. Finally got all the file! Thanks!

np - glad to help.