Can PIX515E V6.1(2) to Cisco VPN Client v3.5 use DHCP to assign the address

[ed]

My setup is remote VPN Clients V3.5 to a central PIX515E V6.1(2).

I want to assign the client VPN tunnel connections addresses from the inside LAN DHCP server, instead of using the PIX local pool.

Can I do this and how?

The PIX has fixed addresses on all interfaces.

The clients will dial into different ISP's in different countries

[j-block]

The best way is to reserve addresses based on MAC address so the device pulls from a different pool. It will be a bit high maintenance however, depending on how many users you have to set up for VPN.