03-25-2010 06:48 PM
Please see attached Network Topology.
I can connect using Cisco VPN client and access all resources from network 192.168.3.0
I cannot ping/ access any hosts on network 192.168.5.0 network.
Any ideas?
Thanks for help in Advance
AD
Solved! Go to Solution.
03-25-2010 07:52 PM
Absolutely correct.
Please add the access-list:
access-list ACCS standard permit 192.168.5.0 255.255.255.0
03-25-2010 07:33 PM
On the 1841 router, you would need to have route for the IP Pool as follows:
ip route 172.16.10.0 255.255.255.0 10.1.1.1
Hope that helps.
03-25-2010 07:39 PM
Hi:
Thanks for the response. I tried it and it still does not work.
Any other ideas?
03-25-2010 07:41 PM
Do you have split tunnel configured for the VPN Client? If you do, do you have the 192.168.5.0/24 in the split tunnel list?
03-25-2010 07:49 PM
You know what. I never caught that error. My split tunnel commands shows:
access-list ACCS standard permit 192.168.3.0 255.255.255.0
group-policy XXX internal
group-policy XXX attributes
vpn-idle-timeout 30
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACCS
Do I need to add this line also?
access-list ACCS standard permit 192.168.5.0 255.255.255.0
Thanks again for your quick response.
03-25-2010 07:52 PM
Absolutely correct.
Please add the access-list:
access-list ACCS standard permit 192.168.5.0 255.255.255.0
03-25-2010 07:53 PM
Awesome!. Let me try that. Will let you know.
03-25-2010 08:03 PM
That was it. You are awesome!
03-25-2010 08:04 PM
Great to hear it's working now. Thanks for the update.
03-25-2010 08:06 PM
Thanks again. Appreciate your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide