08-05-2004 09:37 AM
Hello,
We are planning to migrate from Checkpoint Firewall-1 to FWSM for one of our departments.. Checkpoint has a "client authentication" feature..
Is there an equivalent or similar feature in FWSM ?
Any help will be appreciated...
Thank you..
--osman
08-11-2004 07:42 AM
I have helped a customer implement user based authentication & authorization for access through the FWSM.
So as users attempt to access any resource on the other side the FWSM, the user is prompted to authenticate.
Here's a link to AAA for the FWSM:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_2/fwsm_cfg/aaa.htm
Look specifically for the following if the above is what you would like to accomplish:
- Configuring Authentication for Network Access
- Configuring Authorization for Network Access
thanks
peter
08-11-2004 11:11 PM
Hi!
The Below Document will give u some idea abt configuration part in PIX.
HTH.
Rdgs
Vimal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide