Cisco 3000 VPN Routing PPTP vs IPSec

[andrewmadrid]

Hello,

When I connect to my VPN appliance via the Cisco client, I receive a diffrent routing table than if I connect via PPTP. When connected to PPTP, routing is fine. When connected with Cisco client/IPSec, routing is not fine. What am I missing? Thanks in advance!!

Andrew

[wong34539]

Where is the client getting the IP address - local pool or dhcp? What subnet is the assigned address - same as private interface? If it's on a different subnet, this subnet is not automatically entered into the routing table of the concentrator. Static routes are required.

[andrewmadrid]

Thanks for the reply. I found out the problem but forgot to post resolution here. Turns out the VPN client is not compatible with Windows 2003 server, which is the OS I was running. I loaded the client on my xp laptop and had no issues.

Thanks!