cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3122
Views
0
Helpful
6
Replies

cisco anyconnect long time to logon complete

mostafa.z
Level 1
Level 1

hi,

I configure cisco asa 5545x with firepower and config vpn remote access anyconnect. when client connect with anyconnect long time to untrust certificate (20 second) and to complete 50 second ,

with cisco vpn client when connect click user and pass and connected,

but with anyconnect long time to connect completed.

i change bypassdownload to true in file aneconnect xml but long time to connect

 

1 Accepted Solution

Accepted Solutions

its ok, i change add ip to name then its ok
tnks

View solution in original post

6 Replies 6

How are you authenticating users (locally or external).? Is the delay in
initial connect or after entering the password?

hi, authentication is local and delay when initialing .

In this case, I suggest to start with a pcap capture on client and ASA to
see if there is a delay between packets leaving the client and packets
arriving at ASA. If this is within reasonable range (for example < 200
msec) then you need to debug webvpn anyconnect 127 to see what processing
is done by ASA.

Check the cpu and memory usage of the ASA as well.

hi , i capture and video vpn connect 

this file wireshark 

its ok, i change add ip to name then its ok
tnks