Cisco ASA Web VPN (Anyconnect)

[dalibor.bosic11]

Hi

I have recently setup new cisco asa firewall and it all works good. However when setting up Anyconnect VPN i had to change the port it listens to to 444 because I need access for Outlook web access which listens on port 443 and that i dont want to change.

Is there any way that OWA can stay on 443 as well as web vpn. Now when users log in to any connect they have to type  domainname.com:444 and that is how they log into VPN that works no problem.

Any thought on that. So far it works this way fine so if i have to leave it i will. At this moment I only have one public IP address.

[Karsten Iwen]

Each combination of IP/Port can only be used with one service. If you can't get more IPs from your ISP, you have to run one of these services on a different port.

Or a better way: Use Port 443 for VPN and let the users only connect through VPN to OWA. From a security standpoint it's even better as you don't have to allow access from the internet to your internal server.