Cisco ASA5505 Remote Access VPN

[Srdjan Milovanovic]

Hi all,

Recently I configured ASA5505 with Remote Access VPN (users are authenticated from local Users list and connects with Cisco VPN Client) and it works just fine.

I also configured split tunneling for this VPN profile and created couple of ACLs applied on user accounts depending of their needs.

ASA subnet: 172.18.222.0/23

VPN subnet: 192.168.2.0/26

What I can't make it work is to enable traffic /communication between VPN users.

I would appreciate any help or advice.

Thank you very much in advance!

Kind regards

[Karsten Iwen]

You probably just need to enable intra-interface-communication which is not on by default:

same-security-traffic permit intra-interface

[Srdjan Milovanovic]

Hi Karsten,

I've already included intra-interface communication within my configuratio, but it didn't solved my problem.

Any other ideas?

Thank you very much!