05-21-2019 09:11 PM - edited 02-21-2020 09:39 PM
hi,
we configur cisco asa and ipsec white vpn vlient .
client connect to asa with cisco vpn client .
we will when vpn disconnected , vpn reconnect auto
this is my vpn.ini
[main]
AutoInitiationEnable=1
AutoInitiationRetryInterval=10
AutoInitiationRetryIntervalType=1
AutoInitiationList=test
[test]
Network=172.18.2.0
Mask=255.255.255.0
ConnectionEntry=test
Connect=1
ClientLanguage=
EnableLog=1
ConnectOnOpen=1
[GUI]
WindowWidth=600
WindowHeight=330
WindowX=239
WindowY=278
VisibleTab=0
ConnectionAttribute=1
AdvancedView=1
LogWindowWidth=0
LogWindowHeight=0
LogWindowX=0
LogWindowY=0
DefaultConnectionEntry=test
MinimizeOnConnect=1
UseWindowSettings=1
ShowTooltips=1
ShowConnectHistory=1
AccessibilityOption=1
[LOG.IKE]
LogLevel=1
[LOG.CM]
LogLevel=1
[LOG.PPP]
LogLevel=1
[LOG.DIALER]
LogLevel=1
[LOG.CVPND]
LogLevel=1
[LOG.XAUTH]
LogLevel=1
[LOG.CERT]
LogLevel=1
[LOG.IPSEC]
LogLevel=1
[LOG.CLI]
LogLevel=1
[LOG.FIREWALL]
LogLevel=1
[LOG.GUI]
LogLevel=1
05-22-2019 01:39 AM - edited 05-22-2019 04:46 AM
hi
i can auto reconnect config
but when connection or destination unreachable , vpn disconnect and i must click ok error : Reason 412 (Reason Not Specified by Peer)
if i dont click ok vpn not connect ,
how disable promted erre 412 ?
05-22-2019 09:04 PM
hi
Peer response timeout is 30-480 second
how disable or unlimited ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide