cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1051
Views
0
Helpful
2
Replies
Highlighted
Beginner

Cisco VPN Client cannot access anything through VPN on a ASA5505 8.4

Hello,

Completly new to Cisco ASA and need to get this working ASAP.

ASA 5505 8.4(1) is the secondary FW and I need for it to allow everything going out and block everything coming in but for the VPN clients.  Since a Cisco moron, I used the ASDM and it's wizards to make this work, which might explain my situation.

192.168.101.0/24 is the local network

192.168.101.5 is the ASA IP

192.168.101.2 is the primary FW (and default gateway for the servers I need to access throught the VPN)

10.10.101.0/24 is the VPN IP range (this can be anything you want, I'm not married to this in any way)

My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x server or service (tried telnet, RDP, ping, etc.)

Configuration file is attached.

Help pretty please !

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Cisco VPN Client cannot access anything through VPN on a ASA

Did you add a route for the VPN Pool on the main firewall to the ASA?

Best regards

Peer

Sent from Cisco Technical Support iPad App

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Re: Cisco VPN Client cannot access anything through VPN on a ASA

Did you add a route for the VPN Pool on the main firewall to the ASA?

Best regards

Peer

Sent from Cisco Technical Support iPad App

View solution in original post

Highlighted
Beginner

Re: Cisco VPN Client cannot access anything through VPN on a ASA

I am happy and in a way sad to say I was missing the route...

Thanks !!