Connecting To Inside Interface IP over SSL VPN

[vpoon87]

Hi all,

I've configured AnyConnect successfully and can connect to IPs on the InsideNetwork. However, I'm not able to connect nor ping to the ASA 5525's Inside Interface IP when connected. Is this something new or am I missing something? I was able to configure access on an ASA 5520 which is being replaced with the 5525. I've tried with a connection using an IP on the inside subnet. 

Thanks

Victor

[Philip D'Ath]

Use this command:

management-interface <name of inside interface>

[vpoon87]

Hi Philip,

Thanks for the reply.

Did you mean "management-access inside"? If so, it's already set.

Victor

[vpoon87]

Looks like it's fixed with a software version update.