03-22-2006 07:09 AM
Hi all -
- DSL service with 1 static IP address
- DSL modem configured for "bridge mode"
- 831 router
There are some things I don't understand about all this.
#1: In order to make all this work, I need to have the PPPoE stuff configured on the router, yes?
#2: Do I need to have the "interface Dialer1" configured? And if not, can I put the DSL login info in the "interface Ethernet1" section?
#3: Do I need to explicitly set up NAT? I want my internal clients to get IPs on the 10.10.10.0 network and they need to have full Internet access.
#4: I think I don't understand how the routing should be set up.
#5: Any other helpful hints, I'll gladly take!!
Here's my config:
!This is the running config of the router: 10.10.10.1
!----------------------------------------------------------------------------
!version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 52000 debugging
enable secret xxxx
!
username user password xxxx
no aaa new-model
ip subnet-zero
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool CLIENT
import all
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
dns-server 205.152.xx.xx 205.152.xx.xx
lease 0 2
!
!
no ip domain lookup
ip audit notify log
ip audit po max-events 100
ip ssh break-string
no ftp-server write-enable
no scripting tcl init
no scripting tcl encdir
!
!
!
no crypto isakmp enable
!
!
!
!
interface Ethernet0
description Inside network$ETH-LAN$
ip address 10.10.10.1 255.255.255.0
ip nat inside
no cdp enable
hold-queue 32 in
!
interface Ethernet1
description Outside network, DSL connection
ip address 72.151.yy.yy 255.255.255.0
ip nat outside
duplex auto
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
interface FastEthernet1
no ip address
duplex auto
speed auto
!
interface FastEthernet2
no ip address
duplex auto
speed auto
!
interface FastEthernet3
no ip address
duplex auto
speed auto
!
interface FastEthernet4
no ip address
duplex auto
speed auto
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp pap sent-username username@isp.net password xxxx
!
ip nat inside source list 102 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1 permanent
ip http server
no ip http secure-server
!
!
access-list 23 permit 10.10.10.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!
control-plane
!
!
line con 0
exec-timeout 120 0
no modem enable
transport preferred all
transport output all
stopbits 1
line aux 0
transport preferred all
transport output all
line vty 0 4
access-class 23 in
exec-timeout 120 0
login local
length 0
transport preferred all
transport input all
transport output all
!
scheduler max-task-time 5000
!
end
03-23-2006 04:45 AM
I've mostly the same config, but eth1 with no ip address and modem NOT in bridge mode! Try this ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide