I have been unable to make SUA work with easy VPN. I have an asa 5505 (client) and an asa 5520 (Server).
When the config is like this:
5505:
vpnclient server 192.168.1.0
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
vpnclient vpngroup IPsec password xxxxxxx
vpnclient username domain\user password xxxxxxxx
vpnclient enable
5520:
tunnel-group IPsec type remote-access
tunnel-group IPsec general-attributes
address-pool EasyVpnPool
authentication-server-group radius
default-group-policy IPsec
tunnel-group IPsec ipsec-attributes
pre-shared-key *****
group-policy IPsec attributes
dns-server value 10.1.102.11 10.1.102.12
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Global
default-domain value mine.com
split-dns value mine.com yours.com
ip-phone-bypass enable
nem enable
If I add "secure-unit-authentication enable" to the 5520 group policy nothing works the 5505 does not connect up and no http redirect takes place.
If I do a "vpnclient enable" I am propted for a username ans password but it does not take any thing. Allso the iphone bypass does not work.
Any Ideas? I am stumpped.
Thanks,
Ben
I
