cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
3366
Views
0
Helpful
2
Replies
thomas
Beginner

Error 442 cisco vpn client 5.0.07.0440 in Windows XP 64 bits SP2

Hi there,

I am wondering if anybody has any experience running cisco VPN client over Windows XP SP 2 64 bits.

I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.

Thank you

Martin

2 REPLIES 2

We are have the exact same problem and can't find a fix. Its a fresh install of Windows XP (64bit) on a Dell Latitude M4500.

Any help most appreciated.

Regards,

Rob

viceinfeldt
Beginner

We're having the same problem as well. Here is the output of the Log:

1      15:35:38.821  11/08/11  Sev=Warning/2          CVPND/0xE340002C

Unable to enable the 64-bit VA after timeout

2      15:35:38.821  11/08/11  Sev=Warning/3          CVPND/0xE3400029

The Client failed to enable the Virtual Adapter on 64-bit Windows

3      15:35:38.821  11/08/11  Sev=Warning/2          CM/0xE310000A

The virtual adapter failed to enable

4      15:35:38.867  11/08/11  Sev=Warning/2          IKE/0xE300009B

Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

5      15:35:38.867  11/08/11  Sev=Warning/2          IKE/0xE30000A7

Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)

Machine makes it through IKE Phase 2 on the ASA it's VPN'ing into.

Content for Community-Ad