cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
414
Views
0
Helpful
0
Replies

Forward UDP Broadcast to VPN Client

michaelchandra
Beginner
Beginner

Hi all, I have cisco 837 series as a ADSL modem. I'm on 192.168.1.2 and my VPN client have 192.168.2.1. We can ping each other but when we try to play LAN games, we can't see each other. I believe this is caused by UDP Broadcast not reach the VPN client. How can I forward the UDP broadcast ? Any help will be appreciated. Sorry for my bad english. Thank you.

Here is my configuration :

Building configuration...

Current configuration : 3704 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname michael
!
boot-start-marker
boot-end-marker
!
memory-size iomem 5
no logging console
enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization exec default local 
aaa authorization network sdm_vpn_group_ml_1 local 
!
aaa session-id common
!
resource policy
!
ip subnet-zero
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
!
ip dhcp pool michael
   network 192.168.1.0 255.255.255.0
   default-router 192.168.1.1 
   dns-server 202.134.0.155 
!
ip dhcp pool excluded-address
   host 192.168.1.4 255.255.255.0
   hardware-address 01c8.d719.957a.b9
!
!
ip cef
ip name-server 202.134.0.155
ip name-server 203.130.193.74
vpdn enable
!
!
!
!
username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f.
username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/
!
! 
!
crypto isakmp policy 1
 encr 3des
 authentication pre-share
 group 2
crypto isakmp xauth timeout 15

!
crypto isakmp client configuration group michaelvpn
 key vpnpassword
 pool SDM_POOL_1
 acl 199
 netmask 255.255.255.0
!
!
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
!
crypto dynamic-map SDM_DYNMAP_1 1
 set transform-set ESP-3DES-SHA 
!
!
crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1
crypto map SDM_CMAP_1 client configuration address respond
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1 
!
!
!
interface Ethernet0
 description $FW_INSIDE$
 ip address 192.168.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
 hold-queue 100 out
!
interface Ethernet2
 no ip address
 shutdown
 hold-queue 100 out
!
interface ATM0
 no ip address
 no atm ilmi-keepalive
 dsl operating-mode auto
 pvc 0/35 
  pppoe-client dial-pool-number 1
 !
!
interface FastEthernet1
 duplex auto
 speed auto
!
interface FastEthernet2
 duplex auto
 speed auto
!
interface FastEthernet3
 duplex auto
 speed auto
!
interface FastEthernet4
 duplex auto
 speed auto
!
interface Virtual-PPP1
 no ip address
!
interface Dialer1
 description $FW_OUTSIDE$
 mtu 1492
 ip address negotiated
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 ppp chap hostname ispusername
 ppp chap password 0 isppassword
 ppp pap sent-username ispusername password 0 isppassword
 crypto map SDM_CMAP_1
!
ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
!
ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723
ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21
ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
!
access-list 1 remark SDM_ACL Category=16
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 102 remark SDM_ACL Category=2
access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
route-map SDM_RMAP_1 permit 1
 match ip address 102
!
!
control-plane
!
banner motd ^C
Authorized Access Only
UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED
You must have explicit permission to access this device.
All activities performed on this device are logged.
Any violations of access policy will result in disciplinary action.
^C
!
line con 0
 no modem enable
line aux 0
line vty 0 4
!
scheduler max-task-time 5000
end
0 REPLIES 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: