Get any VPN Client software

dbehl0001 · ‎09-10-2016

Hi,

We have a number of Cisco RVxxx routers. We just bought 3 RV325 models.

We have a number of Gateway to Gateway VPN tunnels defined and they work great.

We want to start using client to gateway tunnels so a user can access the site securly.

Everywhere I go to download the Any Connect or EasyVPN download links I get messages saying there are errors and/or there is no software available.

How do I get the VPN client software to work with the RV320, RV325 or other Cisco VPN Routers?

From the Help file: I try to download the Windows. I get errors messages. HELP.

Easy VPN—Allows remote users to connect this device by using Cisco VPN Client (also known as Cisco Easy VPN Client) utility (available on https://software.cisco.com/download/navigator.html?mdfid=270636499&flowid=4466, VPN Client v5.x or VPN Client v4.x:

– Version 5.0.07 supports Windows 7 (32-bit and 64-bit), Windows Vista (32-bit and 64-bit), and Windows XP (32-bit)

JP Miranda Z · ‎09-10-2016

Hi dbehl0001,

The RV325 does not support the Anyconnect VPN client, but rather uses a browser-based clientless SSL VPN. SSL VPN on the RV325 allows clients to VPN into the network using just a browser, without needing to install any client software. There is a setup guide available here:

Configure Advanced Secure Sockets Layer Virtual Private Network (SSL VPN) on RV320 and RV325 VPN Routers

The reason why you can't find the VPN Client is because is already EOL & EOS so is not even on cisco.com anymore.

If the SSL clientless is not a good options for you, you can try the Shrew VPN client which is 3rd party but should work as well.

Hope this info helps!!

Rate if helps you!!

-JP-

dbehl0001 · ‎09-11-2016

Hi JP,

Thank you for your response. Aside for why Cisco doesn't fix their links I still am a little unsure of a solution.

I tried setting up the SSL clientless solution and can't get things to work. I will continue to try things.

Your response was great. Thanks I will continue to try things that frankly should not be this difficult. Sadly Sonicwall just worked.

JP Miranda Z · ‎09-11-2016

Hi dbehl0001,

You are welcome.

Just keep in mind Cisco is not having problems with broken links, the IPsec Client is just not available for anybody because is already EOL & EOS so is not going to be on Cisco.com.

Hope this info helps!!

Rate if helps you!!

-JP-