02-15-2012 05:32 AM
How do I verify that my site to site VPN is really working using ASDM? I was hoping to see some sort of nifty graph or counter is ASDM but I don't see anything. From the CLI using "sh crypto ipsec SA" I see the encaps and encrypts incrementing so I think it's working.
ASA5505 on each end
ASA Version: 8.0.5
ASDM Version: 6.3.5
Solved! Go to Solution.
02-20-2012 12:00 AM
Hi Tod,
on the cli, indeed the counters in "show crypto ipsec sa" will tell you whether data is passing over the tunnel.
In ASDM you can go to Monitoring -> VPN -> VPN statistics -> Sessions and select "IPsec Site-to-Site" as the filter.
I don't think we have graphs for the data over the tunnels, but you can have a graph of the number of active tunnels (Monitoring -> VPN -> VPN connection graphs -> IPsec tunnels)
hth
Herbert
02-20-2012 12:00 AM
Hi Tod,
on the cli, indeed the counters in "show crypto ipsec sa" will tell you whether data is passing over the tunnel.
In ASDM you can go to Monitoring -> VPN -> VPN statistics -> Sessions and select "IPsec Site-to-Site" as the filter.
I don't think we have graphs for the data over the tunnels, but you can have a graph of the number of active tunnels (Monitoring -> VPN -> VPN connection graphs -> IPsec tunnels)
hth
Herbert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide