How enable ip nat inside on RV345

[psz]

Please help

How enable ip nat inside on RV345 ?

[Flavio Miranda]

Hi @psz 

 Do it using the web gui and it will be much more simpler.  Take a look here.

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5461-configure-the-static-network-address-translation-nat-on-the.html 

[psz]

In this post, setting nat outside is described. I need to set "nat inside" the network

[Flavio Miranda]

I got  it.But, the NAT inside is implict as you can see here. When you select  "All traffic" it might add it to the inside traffic.

[MHM Cisco World]

nat inside to one public wan IP? 

Try use port forwarding 

[psz]

I want to do nat inside for site-to-site VPN connection from my LAN addresses 192.168.1.0/24 to SAAS provider LAN addresses 172.29.82.0/24