How to use telnet to enable SNMP in a router ?

[DALHI_Ahmed]

Hi,

Is it possible to enable the snmp in a router via telnet with the wan address(I have the routers' passwords) ?

If yes, how

Router 1 : Cisco 871 w

Router 2 : Sagem – F@st 3304 v2

thank you

Waiting...

[Jeff Van Houten]

For the Cisco, after you login, snmp is enabled with the snmp-server command, as in snmp-server community (community string) RO

Sent from Cisco Technical Support iPad App

[DALHI_Ahmed]

Hi Jeff,
Do you mean login using telnet ?

Can you explain more please ?

[Jeff Van Houten]

Yes if telnet is enabled on the router.

From the telnet client on your pc, type "telnet (ip address of router)", then proceed through the user name and password prompts.

Sent from Cisco Technical Support iPad App

[DALHI_Ahmed]

telnet @router

login: root

Password: ********

[root @ home]$

What I should do next Jeff ?

Thank you.

[Jeff Van Houten]

Enable ( return)

Connected by DROID on Verizon Wireless

[DALHI_Ahmed]

Enable

bad command

It doesn't work !

[Jeff Van Houten]

http://www.joshgentry.com/cisco/cisco.htm

Sent from Cisco Technical Support iPad App