05-21-2015 06:55 AM - edited 02-21-2020 08:14 PM
With Blackberry's going of support in our organisation we're wanting to implement, configure and deploy an ipsec Ikev2 remote access vpn from our ASA 5540 9.1(5)19 (VPN Premium license) to both iphone and android devices.
So was just to ask can this be done, and if it can, what's the best approach to take, and if anyone has any recommended best practise's?
And do we need to purchase more licences for AnyConnect for Mobile?
As have looked at loads of documentation, but have just got more confused.
So any help much appreciated.
Thanks
Nessie
Solved! Go to Solution.
05-21-2015 08:39 PM
Hi Nessie,
Please visit the below link for details:
http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/acmobiledevices.html
Below link shows the license you require for ASA for anyconnect on Mobile devices.
http://www.cisco.com/c/en/us/support/docs/security/adaptive-security-appliance-asa-software/115920-asa-license-ip-phone-mobile-vpn-00.html
Regards,
Kanwal
Note: Please mark answers if they are helpful.
05-21-2015 08:39 PM
Hi Nessie,
Please visit the below link for details:
http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/acmobiledevices.html
Below link shows the license you require for ASA for anyconnect on Mobile devices.
http://www.cisco.com/c/en/us/support/docs/security/adaptive-security-appliance-asa-software/115920-asa-license-ip-phone-mobile-vpn-00.html
Regards,
Kanwal
Note: Please mark answers if they are helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide