IPSEC l2TP

[cesarmg182]

Dears

Could you give a example how to configure a Firewall that support vpn (IPSEC OVER L2TP). Please give the configuration to have more than 3 vpn clients which connect to this firewall.

I have some questions. How I can do that ? What do I need? The topology could be a simple firewall with three zones; trust,dmz and untrust. The vpn clients connect to the untrush which have an ip public.

thanks very much

[fadlouni]

Hi Cesar.

If you are talking about the Cisco ASA firewall, here is a sample configuration document on what you need to do to get it working:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807213a7.shtml

I hope this helps.

Regards,

Fadi.