06-05-2012 10:07 AM - edited 02-21-2020 06:06 PM
Hello,
I need a help. It´s my first time configuring an ASA FIREWALL and have some trouble to find out. When a finshed the VPN configuration everything is working fine, IP from windows server dhcp, user authentication with radius, but I have a question Why I can´t ping any host from Inside and another office where I created an route???
follow the config.
hostname ciscoasa
domain-name domain.com.br
enable password 6U3abDgKXIPEI3sD encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
!
interface Ethernet0/0
nameif inside
security-level 100
ip address 10.129.133.23 255.255.255.128
!
interface Ethernet0/1
nameif outside
security-level 0
ip address dhcp setroute
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
clock timezone BRST -3
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
domain-name domain.com.br
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list VPN_Funcionarios standard permit 10.129.133.0 255.255.255.128
access-list inside_nat0_outbound extended permit ip any 10.129.133.0 255.255.255 .128
access-list outside_nat0_outbound extended permit ip 10.129.133.0 255.255.255.128 8 any
access-list inside_access_in extended permit ip any 10.129.133.0 255.255.255.128
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp deny any outside
no asdm history enable
arp timeout 14400
global (inside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 201.x.x.x 1
route inside 10.129.133.128 255.255.255.128 10.129.133.122 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server VPNTOTALBR protocol radius
aaa-server VPNTOTALBR (inside) host 10.129.133.10
timeout 5
key ******
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
sysopt noproxyarp outside
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128 -SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256 -MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no vpn-addr-assign aaa
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 5
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption 3des-sha1 aes128-sha1
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
group-policy VPNTOTALBR internal
group-policy VPNTOTALBR attributes
dns-server value 10.129.133.10 10.129.133.130
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
group-lock value VPNTOTALBR
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN_Funcionarios
username admin password BxbZW5I.NuwPZrmP encrypted privilege 15
username totalbr password Jm66i5yb9WnTmMbG encrypted privilege 15
tunnel-group VPNTOTALBR type remote-access
tunnel-group VPNTOTALBR general-attributes
authentication-server-group VPNTOTALBR
default-group-policy VPNTOTALBR
dhcp-server 10.129.133.10
tunnel-group VPNTOTALBR ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map TrafficVPN-policy
!
service-policy global_policy global
prompt hostname context
06-05-2012 11:43 PM
what pool of address do you assign to the VPN client? it needs to be a unique subnet.
if you are assigning 10.129.133.128/25 to the vpn client, then the following route needs to be removed:
route inside 10.129.133.128 255.255.255.128 10.129.133.122 1
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide