ISDN BRI LCP Timout Problem

[d.parks]

Hello,

I have a remote 2600 with a BRI that I am trying to get working with a central 2600 with a PRI. All of my other locations with ISDN dial are working.

When the router connects, some of the LCP messages get through while others timeout. I thought this looked sort of like a 56k v. 64k b-channel problem, but when I tried switching to 56k, the call stopped going through altogether, and I started getting a "Unallocated (unassigned) number" error.

I've attached some of the timout messages that are logged with debugs turned on:

Any suggestions would be greatly appreciated.

[lgijssel]

This may be an authentication issue.

Could you please post the result from the following debug command:

deb ppp neg

We will need the result from both sides

Regards,

Leo

[d.parks]

I've attached the debug output from both routers.