Hi,
I encountered problem in bringing up my isdn line. When I run debug q931 and debug isdn error the following output is shown. May I know what could be the cause? My ISP had checked the line and is fine. They are able to call out using their isdn phone.
Debug isdn q931 output
*Oct 12 14:14:54 MAL: ISDN BR0/2/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xF1
Channel ID i = 0x89
*Oct 12 14:14:54 MAL: ISDN BR0/2/0 Q931: RX <- DISCONNECT pd = 8 callref = 0xF1
Cause i = 0x02809B - Destination out of order
*Oct 12 14:14:54 MAL: ISDN BR0/2/0 Q931: TX -> RELEASE pd = 8 callref = 0x71
Cause i = 0x809B - Destination out of order
*Oct 12 14:14:54 MAL: ISDN BR0/2/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x
F1.
*Oct 12 14:14:55 MAL: ISDN BR0/2/0 Q931: Applying typeplan for sw-type 0x1 is 0x
0 0x0, Called num 77188788
*Oct 12 14:14:55 MAL: ISDN BR0/2/0 Q931: TX -> SETUP pd = 8 callref = 0x72
Bearer Capability i = 0x8890
Standard = CCITT
Transer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x81
Called Party Number i = 0x80, '77188788'
Plan:Unknown, Type:Unknown
Debug isdn error output
*Oct 12 14:12:09 MAL: ISDN BR0/2/0 SERROR: isdn_get_guid: Cannot allocate a GUID
(5)
*Oct 12 14:12:09 MAL: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/2/0, TEI 65 ch
anged to up.
*Oct 12 14:12:11 MAL: ISDN BR0/2/0 SERROR: isdn_get_guid: Cannot allocate a GUID
Thank you.
Delon
