cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
509
Views
0
Helpful
1
Replies

L2TPv3 Pseudowire: No Layer 3 activity

Mister861
Level 1
Level 1

Hi Guys and Girls,

See my topology as attachment!

I have a strange problem with my L2TPv3 over IPSec connection.

At layer 2 everything seems to work fine. I can see lots of MAC-adresses from 'the other side' of the pseudowire in the MAC-Adress table on both routers. The thing is that the servers configurerd with static IP's in the same IP subnet can't ping eachother.. (there's no firewall policy or what so ever on the clients, both accepting ICMP protocol).

NOTES:

-Between the two 878 routers there is full IP connectivity (they can ping eachother);

-The L2TPv3 tunnel is in est / est mode on both sides;

-I can see MAC-adresses on both sides on the 878 mac-address-table from the opposite side;

-When i use Wireshark i can see ARP requests when i initiate something but a Ping of DHCP REQ / ACK never makes it to the other end...

See config's of the both 878 in the attachement!

Kind regards, Mister861

1 Reply 1

Mister861
Level 1
Level 1

No one knows the answer :( ?