10-17-2010 01:27 AM - edited 02-21-2020 04:54 PM
Is it possible to have many site-to-site VPN connections established from main office to branch offices and allow remote users to connect with Cisco VPN client at the same time to the router in a branch office? I have Cisco 800 series routers (892) in the main office.
Thanks for any suggestion, link...
Solved! Go to Solution.
10-20-2010 04:14 AM
Hello Jernej,
If you have a c8xx router in the branch as well, then the scenario you've described
is possible.
See here an example :
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml
Basically you can set multiple entries in a crypto map, both for lan to lan and remote access.
br
-istvan
10-20-2010 04:14 AM
Hello Jernej,
If you have a c8xx router in the branch as well, then the scenario you've described
is possible.
See here an example :
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml
Basically you can set multiple entries in a crypto map, both for lan to lan and remote access.
br
-istvan
10-20-2010 08:17 AM
Thank you Istvan - this is just what I was looking for.
There are snapgear routers in branch offices but that shouldn't make any problems (I hope ).
There is http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094685.shtml another link that is useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide