Hello,
I have deployed a NAC VPN with PIX 7.2.1 and i connect and obtain the token but i don?t obtain the ACL
Session Type: Remote
Username : tecnicos
Index : 1
Assigned IP : 192.168.101.201 Public IP : 213.164.32.47
Protocol : IPSec Encryption : AES128
Hashing : SHA1
Bytes Tx : 3161 Bytes Rx : 8511
Client Type : WinNT Client Ver : 4.8.00.0440
Group Policy : tecnicos
Tunnel Group : tecnicos
Login Time : 17:05:57 UTC Thu Sep 28 2006
Duration : 0h:01m:01s
Filter Name :
NAC Result : Accepted
Posture Token: Healthy
I have configured the group authentication in local and the user authentication in ACS. I have two RACs
Healthy
Assigned Attributes
Vendor Attribute Value
Cisco IOS/PIX 6.0 cisco-av-pair (1) status-query-timeout=300
Cisco IOS/PIX 6.0 cisco-av-pair (1) sec:pg=Limpios
IETF Session-Timeout (27) 36000
IETF Termination-Action (29) RADIUS-Request (1)
Checkup
Assigned Attributes
Vendor Attribute Value
Cisco IOS/PIX 6.0 cisco-av-pair (1) status-query-timeout=300
Cisco IOS/PIX 6.0 cisco-av-pair (1) sec:pg=Actualizaciones
IETF Session-Timeout (27) 36000
IETF Termination-Action (29) RADIUS-Request (1)
In NAP i assign the group tecnicos with token healthy and RAC L2 Healthy and group tecnicos with token checkup and RAC Checkup.
What is my problem?
Regards.
