Hi all,
after upgradeing the pix firewall from version 6.3(4) to version 7.0(1) I have problems with my brunch office witch is connected with a dynamic l2l tunnel.
this is the old config from version 6.3(4)
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map dynmap 30 set transform-set myset
crypto map iwka 20 ipsec-isakmp dynamic dynmap
crypto map iwka interface outside
isakmp enable outside
isakmp key ********* address 0.0.0.0 netmask 0.0.0.0
any ideas, or config samples??
thanks for help
rene