cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
640
Views
0
Helpful
3
Replies

POD in cisco 3845 to Radius Server

Ralema Geno
Level 1
Level 1

I have configured my Cisco 3845  with the POD COnfiguration as follows:

aaa server radius dynamic-author
server-key 7 023653582B265F645D
port 3799
auth-type all

I get the following Error:

No Matching Session

Can someone help me resolve? Is there something i have missed?

3 Replies 3

Jennifer Halim
Cisco Employee
Cisco Employee

Radius protocol typically uses port 1645 or 1812 for authentication. However, you have configured port 3799. What radius server are you authenticating to, and what port does the radius server listen to?

THIS IS THE WHOLE CONFIG FOR RADIUS - AAA:

3799 UDP port for Disconnect Packet to Radius:

radius-server host X.X.X.X auth-port 1812 acct-port 1813
radius-server key 7 *************************
!

aaa authentication login default local group radius
aaa authentication ppp default if-needed local group radius
aaa authorization network default group radius local if-authenticated
aaa accounting update newinfo periodic 1

aaa accounting network default
action-type start-stop
group radius
!
aaa accounting connection default
action-type start-stop
group radius
!
aaa accounting resource default
action-type start-stop
group radius
!
!
aaa server radius dynamic-author
server-key 7 **************
port 3799
auth-type all

Ahhh apology.

You might want to post your question on the AAA section of the forum as it is more AAA issue than VPN issue.