09-08-2004 05:55 AM
Hello,
I need your help.
There is PIX 515 with 6.1. I would like to have:
if a internal client e.g. 192.168.0.50 connect to internal pix device (ethernet1 with IP 192.168.0.1)through a port e.g. 12000 and 12500-12700, the pix should forward this acces to other computer e.g. 192.168.0.15.
How can I do it?
I thought, it can be work with
static (inside,inside) tcp 192.168.0.1 12000 192.168.0.15 12000 netmask 255.255.255.255 0 0
static (inside,inside) tcp 192.168.0.1 range 12500 12700 192.168.0.15 range 12500 12700 netmask 255.255.255.255 0 0
But it doesn't.
Tnank you very much in Advance!
09-09-2004 05:33 AM
The PIX does not and cannot at this point send out packets out the same interface they were received on. In your case this basically means that you cannot use the PIX to do the redirection you want.
09-09-2004 06:10 AM
Ok
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide