cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
814
Views
0
Helpful
4
Replies

port forward from linksys Router to Layer 3 cisco switch to Vlan host

edwincharles
Level 1
Level 1

Hi,

 

Need help in forward port 3389 from my linksys router to my cisco switch which has a few Vlans configured. Ip routing is enabled and i am able to get out the the internet from all Vlans. I also have IP routing enabled. The problem i have is that i created a vlan on the switch which i use to connect some of my local devices. i..e server. Before having my cisco switch i was easily able to port forward 3389 to the specific host via ip and access my server remotely.

need to access server remotely from internet using dynamic dns, what configuration to be done on cisco switch to achieve it

 

Thanks

4 Replies 4

Hello,

if the Linksys is doing the NAT, that is where your port forwarding must be configured. What model is the Linksys, and how is your (L3) Cisco switch connected to the Linksys ? Post the configuration of the Cisco as well...

Hello,

LINKSYS WAG320N

attached config for switch , LINKSYS connected to port 48

ip for server is 10.10.110.x

Hello,

there are no access lists configured on the L3 switch, so all ports are open. What do you have configured on the Linksys (Applications & Gaming --> Single Port Forwarding) ?

single port forward