My topology have two components:
- Cisco Router 1841 (with IOS flash:c1841-advipservicesk9-mz.124-20.T1.bin)
- Cisco ASA 5510 (With OS asa724-k8.bin)
I have configured two ISP in the 1841 Router and statics nat with respective ports. But When I create my VPN from Cisco ASA and in the Cisco Router create a static nat assign one public IP to Cisco ASA.
But My VPN (Site to Site) work when I connect Cisco VPN Client to Cisco ASA. But if I did'nt connect with Cisco VPN Client my VPN Site to Site it does'nt work. Whe I conect a Cisco VPN Client I see in the Cisco Router the following NAT Translation:
esp 200.49.183.186:0 10.10.10.1:0 201.224.81.41:0 201.224.81.41:8BDC9BC0
tcp 200.49.183.186:445 10.10.10.1:445 200.49.162.35:2949 200.49.162.35:2949
tcp 200.49.183.186:445 10.10.10.1:445 200.49.169.225:9256 200.49.169.225:9256
udp 200.49.183.186:500 10.10.10.1:500 201.224.81.41:500 201.224.81.41:500
udp 200.49.183.186:4500 10.10.10.1:4500 190.57.118.126:4500 190.57.118.126:4500
esp 200.49.183.186:0 10.10.10.1:DAAB01A4 201.224.81.41:0 201.224.81.41:0
I Think Is a Bug but I use c1841-advipservicesk9-mz.124-24.T1.bin and c1841-advipservicesk9-mz.124-20.T1.bin and my problem persist. Please let me know if you know about this issue.
And If can recomend me a IOS who presents the solution for my issue,
Thanks!!!,
Guillermo de Leon
