12-20-2020 08:55 AM
We currently use the Cisco AnyConnect VPN for our users but we do not have Service Before Login (SBL) setup and configured for use. My question is on testing this out to see how it works. Can I simply extract the gina .msi package installation from the .zip file from Cisco download, install that on my laptop and be able to test logging into the Active Directory domain or do I have to make some additional configuration changes on the ASA side to support this first before testing?
Thx in advance for any assistance given.
Solved! Go to Solution.
12-20-2020 09:01 AM
You will also need to modify the AnyConnect profile on the local machine to enable SBL, you can do this using the AnyConnect Profile Editor. You can either copy the updated profile to the ASA or save in the correct location on the local computer.
Guide here.
12-20-2020 09:01 AM
You will also need to modify the AnyConnect profile on the local machine to enable SBL, you can do this using the AnyConnect Profile Editor. You can either copy the updated profile to the ASA or save in the correct location on the local computer.
Guide here.
12-20-2020 09:07 AM
Thx for quick response on this as the document was very helpful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide