08-16-2016 09:24 AM - edited 02-21-2020 08:56 PM
Hi
Can anyone give me a link to video (preferred) or exact section in ASDM guide on how to implement:
a) RA VPN with AnyConnect using IPSec IKEv1
b) RA VPN with AnyConnect using IPSec IKEv2
Thanks and Regards
08-17-2016 06:48 PM
AnyConnect only supports ikev2.
This is a pretty good guide to configure this through ASDM:
https://supportforums.cisco.com/document/74111/asa-anyconnect-ikev2-configuration-example
Hope this info helps!!
Rate if helps you!!
-JP-
08-23-2016 02:03 AM
Hi JP,
thanks for the link. The configuration on the link you mentioned is done using the VPN Wizard.
There in step 6) you see that Authentication Method used is AAA. The wizard provides no way to change that to certificate. How can I make sure that the users using a certificate with a specific OU field would be able to connect to ASA.
Thanks and Regards,
08-23-2016 06:40 PM
Hi rjadhav163,
This link explains the CLI configuration for AnyConnect with ikev2 and double authentication with aaa and certificates, if you want only certificate authentication you can keep the certificate configuration and remove the aaa from the tunnel group.
http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/113692-technote-anyconnect-00.html
Hope this info helps!!
Rate if helps you!!
-JP-
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: