10-03-2005 01:34 PM
Looking to use a single Radius platform for authenticating Remote, wired and wireless users and machines. Anyone with some experience with that use to share some lessons learns...
10-03-2005 09:36 PM
Hello Richard,
there is a previous post from a user who wants to add authentication to his Cisco ACS Radius server for wireless clients, it might be worth contacting that user to see how he resolved this...here is the link to the thread:
Also, have a look at the document below, which talks about the issue:
Selecting an EAP Method: the RADIUS Authentication Server Component
http://www.interlinknetworks.com/news/newsletters/20031104/tech.htm
HTH,
GP
10-04-2005 08:50 AM
Thanks....next issue...Wired infrastructure (802.1x, radius and AD authentication works) In adding wireless clients to the mix.....Preshared Key works but when using 802.1x user authentication works, machine does not, and DHCP address is not getting passed...anythoughts?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide