09-25-2004 01:04 PM - edited 02-21-2020 01:21 PM
Hi,
I am trying to connect to PIX firewall using Cisco VPN Client 4.0.3.
When I try to connect it, after typing user name and password, its
says "
Secure VPN connection is terminated locally by the client
Reason 412: The remote peer is no longer responding."
The firewall config is attached.
Please let me know whats I am doing wrong.
Thanks alot for your help.
Asif.
09-27-2004 09:12 AM
Here is an example config:
hostname pix
domain-name localdomain
clock timezone EST -5
clock summer-time EDT recurring
fixup protocol esp-ike
names
name 192.168.1.0 LocalNET
name 192.168.200.0 VPN-Pool
access-list NONAT permit ip LocalNET 255.255.255.0 VPN-Pool 255.255.255.0
access-list VPN permit ip any VPN-Pool 255.255.255.0
ip local pool VPNPool 192.168.200.1-192.168.200.254
global (outside) 1 interface
nat (inside) 0 access-list NONAT
nat (inside) 1 LocalNET 255.255.255.0 0 0
aaa-server LOCAL protocol local
aaa authentication secure-http-client
sysopt connection permit-ipsec
crypto ipsec transform-set TRANS esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address VPN
crypto dynamic-map outside_dyn_map 20 set transform-set TRANS
crypto map MYMAP 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map MYMAP client authentication LOCAL
crypto map MYMAP interface outside
isakmp enable outside
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup VPNGroup address-pool VPNPool
vpngroup VPNGroup dns-server dns2 dns1
vpngroup VPNGroup default-domain localdomain
vpngroup VPNGroup idle-time 1800
vpngroup VPNGroup password grouppassword
username vpnclient password vpnclient-password
sincerly
Patrick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide