Hello, I am facing issue to connect with my ASA 5520 with anyconnect or ftp internal server. i was a begineer and i don't know what is the issue.
i have pasted config and also attached running-config. i know i have wrong configured ACL and NAT but last 4 days i didn't know how torrect this i will try my best.
ASA Version 9.1(7)32
!
hostname Core-FW1
names
ip local pool VPN-POOL 172.25.160.240-172.25.160.250 mask 255.255.255.0
!
interface GigabitEthernet0/0
description Outside-Internet
nameif outside
security-level 0
ip address 70.60.86.202 255.255.255.252
!
interface GigabitEthernet0/1
description Inside-network
nameif inside
security-level 100
ip address 172.25.53.254 255.255.255.0
!
interface GigabitEthernet0/2
description DMZ-network
nameif dmz
security-level 50
ip address 172.25.90.254 255.255.255.0
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
!
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network dmz-internet
subnet 172.25.0.0 255.255.0.0
object network OBJ-ANYCONNECT-SUBNET
subnet 172.25.160.0 255.255.255.0
object network internal-network
subnet 172.25.0.0 255.255.0.0
object network obj_FTP_Server
host 172.25.53.220
object network obj_FTP_Outside
host 192.168.0.220
object-group network vpn
network-object 172.25.160.0 255.255.255.0
access-list SPLIT_TUNNEL standard permit 172.25.0.0 255.255.0.0
access-list OUT extended permit tcp any object obj_FTP_Server eq ftp
access-list OUT extended permit tcp any object obj_FTP_Server eq ftp-data
access-list inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu dmz 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp inside 172.25.53.7 b083.fe97.30dc
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static internal-network internal-network destination static vpn vpn no-proxy-arp
!
object network dmz-internet
nat (dmz,outside) dynamic interface
object network obj_FTP_Server
nat (inside,outside) static obj_FTP_Outside
!
nat (inside,outside) after-auto source dynamic internal-network interface
access-group OUT in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 70.60.86.201 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 172.25.53.0 255.255.255.0 inside
http redirect outside 80
no snmp-server location
no snmp-server contact
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh stricthostkeycheck
ssh 172.25.53.0 255.255.255.0 inside
ssh 172.25.160.0 255.255.255.0 inside
ssh timeout 15
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd lease 3000
dhcpd domain pcmartx.com
!
dhcpd address 172.25.53.1-172.25.53.250 inside
dhcpd dns 209.18.47.61 209.18.47.62 interface inside
dhcpd option 3 ip 172.25.53.254 interface inside
dhcpd enable inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-4.3.02039-k9.pkg 1
anyconnect enable
tunnel-group-list enable
cache
disable
group-policy ANYCONNECT_pcmartx internal
group-policy ANYCONNECT_pcmartx attributes
dns-server value 4.2.2.2 209.18.47.62
vpn-simultaneous-logins 1
vpn-tunnel-protocol ssl-client ssl-clientless
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SPLIT_TUNNEL
webvpn
anyconnect keep-installer installed
anyconnect dpd-interval client 30
anyconnect ask none default anyconnect
username anees password x.................x encrypted privilege 15
username anees attributes
service-type remote-access
tunnel-group pcmartx type remote-access
tunnel-group pcmartx general-attributes
address-pool VPN-POOL
default-group-policy ANYCONNECT_pcmartx
tunnel-group pcmartx webvpn-attributes
group-alias pcmartx_SSL enable
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class class-default
set connection decrement-ttl
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d7d1e42a3bb087651047b693ef96da5c
: end
