04-27-2007 09:32 AM
Hi all,
I have a ADSL Line/Modem, connected to a PC, and gives me a good internet connection.
I have installed in my PC a vpn software, "CheckPoint Secure Client", that i use to connect to the establish a vpn tunnel to my company checkpoint Firewall, giving me Job Resources.
Now i bought a ADSL Router, Cisco 877, wich have 4 Switch port's more.
I configured the router to various LAN users access the internet, with NAT overload (PAT), wich works fine.
When i tried to connect to my work with vpn software, i couln't establish the connection, saying that i could not connect to the VPN Gateway.
I perform a ping to the public ip, that i use to establish the connection, and the CheckPoint guy, says that im reaching the site.
I dont know what is wrong, since if i change it all to the first solution, PC - ADSL - Internet - CheckPoint, the connection is established.
This is the scenario i perform, and the attached the router configuration.
[PC 1] ----- [Cisco877] ----- [Internet] ----- [CheckPoint FW]
[PC 2] ----------|
The Router, should not perform any kind of vpn issues, rigth ?
its only a hub in the tunnel?, or should i config something more?
What kind of debug should i perform ?
Best Regards,
Petr?nio
05-02-2007 12:53 AM
05-02-2007 04:02 AM
I found the problem.
The CheckPoint had a 10.10.10.x network configured and was applying a diferent network for vpn users.
I changed the DHCP range from 10.10.10.x to 192.168.0.x in the Cisco 877, and it all works great.
Tks any way,
Petr?nio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide