cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
416
Views
0
Helpful
1
Replies

Remote site 2 Internet Connections...

bjgodfrey
Level 1
Level 1

I have a remote office that currently connects back to a Central data center via Site to Site VPN.  I am bringing up a 2nd internet connection as a fall back in the Remote Office.  How do I configure the Site to Site VPN to work correctly so that if the primary internet connection goes down, the site fails over to the secondary? 

On Remote the internet connections are from different providers so they have completely different blocks of public IPs.

Central

ASA 5520 8.0(4) 

Gig 0/0 Public IP

Remote

ASA 5520 8.4(1)

Gig 0/0 Public IP

Gig 0/3 Public IP (2nd internet)

1 Accepted Solution

Accepted Solutions

mvsheik123
Level 7
Level 7

On the HQ end you need to enter the new ISP (for remote site) IP address as secondary peer.

On Remote end you need to add SLA so that traffic will be redirected over second link incase of primary failures.

Search the forum you find many  posting with ref to this scenario. Here is one...

https://supportforums.cisco.com/message/3452739#3452739

hth

MS

View solution in original post

1 Reply 1

mvsheik123
Level 7
Level 7

On the HQ end you need to enter the new ISP (for remote site) IP address as secondary peer.

On Remote end you need to add SLA so that traffic will be redirected over second link incase of primary failures.

Search the forum you find many  posting with ref to this scenario. Here is one...

https://supportforums.cisco.com/message/3452739#3452739

hth

MS