Removing a static entry on a PIX 520

[lancerman]

if I have an entry as follows:

static (inside,outside) 204.x..x.x 204.x.x.x netmask 255.255.255.255 0 0

How do I delete that line???

[llascare]

You should be able to remove the static translation, by clearing the translation table and then removing the line:

clear xlate

no static (inside,outside) 204.x..x.x 204.x.x.x netmask 255.255.255.255 0 0

clear xlate

[lancerman]

I enter enable mode, then I enter config terminal mode, I followed your steps and after thet I run Show Config and the entry is still there......what am I doing wrong????

Thanks!!!