RV325 (1.3.1.12) Can't change PPTP settings

[greg]

Whenever I try to change PPTP settings I get the following error next to the "Range End" field:

PPTP IP Range should be in either LAN IP Subnet or Multiple Subnet, please change the settings.

There is only one vlan and the specified IP address range for PPTP is in it (immediately following the DHCP range).

[Georg Pauwen]

Greg,

this could be related to the following bug:

RV320: DHCP Range overlap error seen incorrectly

CSCut07184

Description

Symptom:
- When creating a DHCP Range where the last octet is the same or overlaps the last octet of PPTP or SSL VPN ip range, an error is seen:
"PPTP IP Range,SSL IP Range,DHCP IP Range can not overlap. Please change the settings."
- This is seen even when the networks are different

Conditions:
- Creating a DHCP ip range where the last octet overlaps the last octet of SSL VPN or PPTP ip range

Workaround:
- Only known workaround is to use a range where the last octet doesn't overlap the last octet of SSL VPN or PPTP ip range

[greg]

The two ranges do not overlap and I get the same error when changing the IP address range for SSL VPN (Advanced Settings).  I want to disable both but am unable to because of this bug.

[jmasood]

[jmasood]

[jmasood]