SCEP Enrollment failure IOS CA Server

[juanchop246]

Hi

I am trying to enroll a non IOS SCEP client to a Cisco IOS CA Server. When I put a sniffer, it show me:

HTTP GET/flash/pkiclient.exe?operation=GETCACert&message=ca,  but the next packet in the sniffer says HTTP/1.1 404 Not Found.

In the Router Flash there is no pkiclient.exe, so i dont understand from where the client should be get this .exe.

Thank in advance

[Marcin Latosiewicz]

the URL should be from /cgi-bin/ not /flash ...

Have a look:

http://www.cisco.com/en/US/tech/tk1132/technologies_tech_note09186a0080c15dab.shtml

and

http://tools.ietf.org/html/draft-nourse-scep-23

[juanchop246]

Hi Marcin

Thanks for you reply.

Actually the non IOS Client (Huawei) is trying to enroll to the url http://ip.address:80 and also http://ip.address but his debug says "invalid url" in both cases. Do you know successful deployments between Cisco IOS CA Server and Non Cisco clients. It is possible to change the default url maybe htttp://ip.address:80/abc123/?

Thanks.