Show group name and group password

[angel-moon]

Hello,

Can anyone tell me the command(s) that will show the group name and group password on a PIX 501 running 6.3(4)?

Thanks in advance!  All replies rated.

[ajhaldiy · Accepted solution]

Hi Angel-moon,

Hope you are doing good,

Below are some links which will help you in configuring recovering the pre-shared key from the running configuration

Old codes of PIX doesn't support more command to decrypt the password

The other way is to copy the running config to a TFTP server

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/tz.html#wp1027782

Below link will help you in specifying TFTP server

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/tz.html#wp1026054

This issue is also discussed in below thread

https://supportforums.cisco.com/message/885007

Let me know if you have any other queries

Regards

Ashish