11-17-2011 04:45 AM
I am trying to setup a site to site VPN between ASA 5510 and SSG 140 firewall. ASA end of the VPN is having dynamic public IP address. I tried sending hostname as peer identity on ASA by changing the IKE parameter setting but SSG somehow is not able to match the hostname of remote peer and reporting remote as unrecognized peer. Does someone has experience in setting up site 2 site VPN in similar setup?
11-22-2011 01:20 AM
Hello,
we do it with an dyndns account name and you have to use agressive mode.
10-15-2013 12:37 AM
Hi There, first of all. the system keeps returning back with the message that the outside going interface is 0/0.
We have a Trust-VR and within is the : eth0/0-Trust; Eth0/2-Untrust; Eth0/1-DMZ; Eth0/4-Vlan; Eth0/6-0/8-BCS
I have a Tunnel1 interface and need to create MIP`s but now have the problem that the SSG-140 says that outside going interface is 0/0. Do I create the MIP`s on different interface or on the Trust-Eth0/0?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide